Summary: In a network environment, you deploy the Dynamic Host

Configuration Protocol version 6 (DHCPv6) solution.

This solution

uses Internet Protocol version 6 (IPv6). However, on a Windows Vista-based or

Windows Server 2008-based DHCP client computer, you may find that some

network-related parameters are configured incorrectly.

Therefore, you cannot access the network correctly.

Resolution: Fixing Some network-related parameters for a Windows Vista-based or Windows Server 2008-based DHCP client computer are configured incorrectly when you use DHCPv6 errors is a really difficult task for most computer users. To solve Some network-related parameters for a Windows Vista-based or Windows Server 2008-based DHCP client computer are configured incorrectly when you use DHCPv6 problems effectively and efficiently, install a good Some network-related parameters for a Windows Vista-based or Windows Server 2008-based DHCP client computer are configured incorrectly when you use DHCPv6 Error Removal Tool is a smart solution. This is definitely your ideal tool to solve Some network-related parameters for a Windows Vista-based or Windows Server 2008-based DHCP client computer are configured incorrectly when you use DHCPv6 problem in the shortest time.

Download the Some network-related parameters for a Windows Vista-based or Windows Server 2008-based DHCP client computer are configured incorrectly when you use DHCPv6 repair tool

In order to repair Some network-related parameters for a Windows Vista-based or Windows Server 2008-based DHCP client computer are configured incorrectly when you use DHCPv6 problem, install SmartPCFixer immediately. This optimization tool is already proven to locate, identify, and remove Some network-related parameters for a Windows Vista-based or Windows Server 2008-based DHCP client computer are configured incorrectly when you use DHCPv6 errors. Your computer should run faster and smoother after using this software.


Method for Advanced Users

Hotfix information

A supported hotfix is available from Microsoft. However, this hotfix is intended to correct only the problem that is described in this article. Apply this hotfix only to systems that are experiencing the problem described in this article. This hotfix might receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next software update that contains this hotfix.

If the hotfix is available for download, there is a "Hotfix download available" section at the top of this Knowledge Base article. If this section does not appear, contact Microsoft Customer Service and Support to obtain the hotfix.

Note If additional issues occur or if any troubleshooting is required, you might have to create a separate service request. The usual support costs will apply to additional support questions and issues that do not qualify for this specific hotfix. For a complete list of Microsoft Customer Service and Support telephone numbers or to create a separate service request, visit the following Microsoft Web site: http://support.microsoft.com/contactus/?ws=supportNote The "Hotfix download available" form displays the languages for which the hotfix is available. If you do not see your language, it is because a hotfix is not available for that language.

Important Windows Vista

and Windows Server 2008 hotfixes are included in the same packages. However,

only one of these products may be listed on the “Hotfix Request” page. To

request the hotfix package that applies to both Windows Vista and Windows

Server 2008, just select the product that is listed on the page.

Prerequisites

To apply this hotfix, the computer must run one of the following:

  • Windows Vista Service Pack 1 (SP1)
  • Windows Server 2008
  • Restart requirement

    You must restart the computer after you apply this hotfix.

    Hotfix replacement information

    This hotfix does not replace a previously released hotfix.

    File information

    The English version of this hotfix has the file attributes (or later file attributes) that are listed in the following table. The dates and times for these files are listed in Coordinated Universal Time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time item in Control Panel.

    Windows Vista and Windows Server 2008 file information note

    The MANIFEST files (.manifest) and MUM files (.mum) installed

    for each environment are listed

    separately. MUM and MANIFEST files, and the associated security

    catalog (.cat) files, are critical to maintaining the state of the updated

    component. The security catalog files (attributes not listed) are signed with a

    Microsoft digital signature.
    For all supported x86-based versions of Windows Server 2008 and Windows Vista
    File nameFile versionFile

    sizeDateTimePlatformDhcpcmonitor.dll6.0.6001.2229610,24028-Oct-200804:33x86Dhcpcsvc.dll6.0.6001.22296204,28828-Oct-200804:33x86Dhcpcsvc6.dll6.0.6001.22296131,07228-Oct-200804:33x86
    For all supported x64-based versions of Windows Server 2008 and Windows Vista
    File nameFile versionFile

    sizeDateTimePlatformDhcpcmonitor.dll6.0.6001.2229612,28828-Oct-200804:50x64Dhcpcsvc.dll6.0.6001.22296268,28828-Oct-200804:50x64Dhcpcsvc6.dll6.0.6001.22296163,84028-Oct-200804:50x64
    For all supported Itanium-based versions of Windows Server 2008
    File nameFile versionFile

    sizeDateTimePlatformDhcpcmonitor.dll6.0.6001.2229624,06428-Oct-200804:56IA-64Dhcpcsvc.dll6.0.6001.22296546,30428-Oct-200804:56IA-64Dhcpcsvc6.dll6.0.6001.22296358,40028-Oct-200804:56IA-64

    What Else Does SmartPCFixer Offer You?

    Apart from fixing Some network-related parameters for a Windows Vista-based or Windows Server 2008-based DHCP client computer are configured incorrectly when you use DHCPv6 problems, SmartPCFixer is designed to provide the user's computer system with better optimization, which helps you manage startup items, desktop, browser objects, Internet, system service, Windows optimization, file extensions and so on. With these sophisticated utilities your system is tuned up to run at the optimal state.

    SmartPCFixer is designed to scan, diagnose and repair your operating system. Using it results in better optimization, manages startup and desktop, assists you with maintaining browser objects, internet options, system service, and repairs file extensions. With this arsenal of powerful, sophisticated utilities your system is tuned to run at its optimal state. Included are Easy Repair Wizard, Error Utilities, File Association fixer, Register ActiveX, Shortcuts Fixer, Winsock2 Repair toolkit, Dll Fixer and more.



    Related: Not All Worksheet Functions Supported As Application,MS10-033: Vulnerabilities In Media Decompression Could Allow Remote Code Execution,MS09-009: Description Of The Security Update For The 2007 Microsoft Office System And For The Microsoft Office Compatibility Pack: April 14, 2009,PC WSPlus: Description Of Offline And Online Merging,PMAdmin Fails To Set AuthAccountDenyThreshold Or Timeout
    Read More: ,How to modify the Sales Transaction History Report in Report Writer,FIX: Error message when you run the sp_add_alert stored procedure in SQL Server 2008 on a computer that is running Windows Server 2008 or Windows Vista: "SQLServerAgent Error: WMI error: 0x80041003",Frequently asked questions about Message Queuing and the MSMQ-MQ Series Bridge,FIX: The SQL-DMO SpaceAvailableInMB property of the Database object may return an incorrect value in SQL Server 2005 or in SQL Server 2000,FIX: Error message when you check in a UTF-8 or UTF-16 encoding file and then update the warehouse in Visual Studio 2008 Team Foundation Server: "An unexpected exception occurred while calculating code churn"